Payment & Shipping Terms:
|Rated Input Power:||1000W||Wattage:||1000-1299W|
|Gross Weight:||12kg||Model Number:||FL1704|
Weld Cleaning Machine Polishing Machine Cleaning And Polishing Stain Weld Polishing Machine
The bead processor is also known as the weld cleaning machine, the weld beater, the weld
polishing machine. Can be highly efficient treatment of argon arc welding stainless steel
products generated by the weld macular and dark spots. Use the machine to deal with the gun
lightly stained with the treatment solution to the weld macular and dark spots gently wipe back
and forth, macular and dark spots immediately disappear. The machine uses imported
electronic components, relays and high-speed rectifier, automatic short circuit protection,
flexible operation, convenient and safe, is to do stainless steel products and engineering
company is a good helper
The local switch is 36V voltage for fast processing stalls, processing speed, the effect is
almost; 24V slow processing stalls, processing speed is slow, the effect is better.
Instructions for use:
1. Plug the power supply into the AC 220V, connect the torch to the appropriate terminal,
plug in the control wire, turn on the power switch, which is the power indicator (ie, the red
light). The treatment of guns on the copper head wrapped in processing cloth stained with
treatment solution, quasi-weld macular and dark spots gently wipe back and forth, macular
and dark spots immediately disappear. After treatment can be wiped with water wet cloth,
2. If the work of the gun and the workpiece if the short circuit, the machine will immediately
disconnect the main power circuit, and at the same time sound and light alarm! Short
circuit contact after a few seconds, the main circuit automatically restored! Can continue to work.
1. Use the machine to wear masks and gloves, beware of the treatment solution into the
2. Do not connect the machine panel to the workpiece and handle the gun
3. When dealing with the use of copper guns must be wrapped on the processing cloth,
handle cloth to be persistent persimmon to keep moist, easy to break when the cloth dry,
then the tip and the workpiece short circuit will cause the machine to stop the work of the
alarm, the tip from After the workpiece has been removed, the machine will automatically
return to the working state after about 5 seconds.
4. If used indoors, please keep your ventilation.
Input voltage: AC 220V / 50Hz
Output voltage: DC 24V / 36V