TIG Welding Washing Machine Weld Cleaning Machine Weld Polishing Machine
Accessories: 1pc 4m big power cleaning gun/torch
1pc 2m earth cable
1 bag cotton ,rubber band
Input voltage: AC 220V / 50Hz
Output voltage: DC 24V / 36V
Host weight: 9.6KG
Gross weight: about 14Kg
Use scope: This product is widely used in stainless steel decoration, kitchenware, chemical machinery, food machinery, dyeing and finishing machinery and other stainless steel products industry.
Instructions for use:
1. Connect the ground clamp to the workpiece, make the gun(torch) power on,make the gun touch the cleaning fluid, cleaning the welding seam place slowly moving back and forth, the black color of welding will disappear instantly , after thate rinse with water immediately.
2. When there is a small spark during cleaning, means that the processing cloth has been broken, insulation failure, replace the cloth.
3. Connect the cleaning gun( torch) and the ground cable to the correct position, and then use a small piece of cloth tip with a rubber band to wrap the gun(torch), make the gun(torch) insulated.
4. If there is a short circuit during working, power will be automatically disconnected, machine stop working, then simply press on again, you can continue to work
1. The use of this machine to wear respirators and gloves, beware of liquid spray into the human eye.
2. Do not connect the machine panel to the workpiece and then handle the gun line.
3. Handling gun must be used when handling cloth.
Welder cleaning machine, also known as weld polishing machine, welding machine, it can efficiently deal with welding machine welding stainless steel products produced by the black welding tungsten Tungsten, Road rub, black disappear immediately. The machine adopts imported electronic components, relays and high-speed rectifier, automatic short-circuit protection, flexible operation, convenience and safety, stainless steel products and engineering company is doing a good helper.